Contact us today on: 03 8560 3200

Overhead Thermal Counter


Brochures - People Counters
Video Demonstration
Contact for pricing

Our Overhead Thermal People Counter fits discreetly onto the ceiling facing downwards and counts the people that pass underneath using thermal technology. The sensor is designed to detect the heat emitted by people passing underneath it as infrared radiation.

The units contain imaging optics, sensors, signal processing and interfacing electronics all within a discretely designed moulded housing. High-performance algorithms allow you to count people accurately even in high-volume areas. 

The Overhead Thermal People Counters have two count lines allowing separate counting for both "In" and 'Out" directions. The integrated SNG Hub (Ethernet or 3G) provides the wireless capture of the counting data from one or multiple counters and uploads it to a local or remote server every minute.

For wide opening configurations you can implement additional overhead "nodes" to provide a counting coverage over an extended area.

Our unique IMMOTION software allows users to analyse the data by hour, day, week, month, and year in table or graph form. This valuable information reveals peak traffic periods to determine optimal operating hours and staffing requirements, and helps calculate customer/sales conversion ratios.

Features

  • Easy Overhead installation (only requires 240 volt power)
  • Wireless Network Data Transfer
  • Detailed Analysis via Web Browser
  • Single Portal Displays Multiple Locations
  • Great Britain/European designed and built
  • Exceptional after sales support
  • 1 Year Warranty

Availability

Only limited stock of this model is available for existing customers. For new customers this model has been replaced with the Overhead 3D People Counter which provides improved features and functionality.

Package Features

Overhead Thermal Sensor

Overhead Thermal Sensor

Overhead Thermal Sensor

Our Overhead Thermal Sensor is a ceiling mounted device designed specifically to count multiple people in both directions. It uses a heat-sensitive sensor and a high speed signal processing controller all neatly contained within a moulded plastic housing for easy mounting to the ceiling.

The downward looking configuration allows the thermal sensor to record a count by detecting the heat emitted by people passing underneath within the sensing area. The sensing area of the detector is a square on the floor and the width approximately equal to mounting height (e.g. when mounted at 3.5m a 60˚ unit ‘sees’ a 3.25 x 3.25m square on the floor).

For wide locations, a number of sensors can be joined together to increase the zone span.

The captured people count data is automatically relayed wirelessly from Overhead Thermal Sensor to the Ethernet Network Gateway device (SNG10E) or 3G Gateway device (SNG103G)

This particular model PCM30C1 has a mounting height of 2.2m to 4.8m. (Optional model PCM31C1 with a mounting height of 4.0m to 7.0m is also available)

SNG Hub (Sensor Network Gateway)

SNG Hub (Sensor Network Gateway)

The SNG Hub wirelessly communicates with the people counting sensors to receive the latest, up to date, count data from one or more entrances within a 20 metre radius. Once received, the count data is automatically sent at regular intervals to the IMMOTION™ software where the count data can be viewed/exported by hour/day/week/month year totals.

The SNG Hub is available in two editions:

Ethernet (SNG10E) Edition

SNG10EThe Ethernet edition (SNG10E) is designed to connect directly into your local network via an Ethernet LAN port or can be connected to your buildings Wi-Fi via an optional Wi-Fi Access Point/Bridge. The SNG10E is ideal for situations where there are Ethernet ports available within a 20 metre range of the people counting sensors. The hub is able to collect count data from up to 10 sensors within a 20 metre radius.

3G (SNG3G) Edition

SNG3GThe 3G Edition (SNG3G) utilises a cellular 3G connection to communicate to the IMMOTION software. The SNG3G is ideal for situations where there are no Ethernet ports available near the sensors. The hub is able to collect count data from up to 10 sensors within a 20 metre radius. The SNG3G requires a full size SIM (not included) and is compatible with all the mobile data providers in Australia and New Zealand.

To use the SNG3G you will also need to be ensure that the server you install IMMOTION™ software onto is externally accessible over the internet.

IMMOTION™ Software

IMMOTION™ Software

Our IMMOTION™ software allows users to analyse count data by hour, day, week, month, and year in table or graph form. This valuable information reveals peak traffic periods to determine optimal operating hours and staffing requirements, and helps calculate customer/sales conversion ratios.

The IMMOTION™ software/database is optimised to handle multiple locations and/or people counters for easy viewing and overall analysis. The IMMOTION™ software/database is scalable so that additional SNG Hub's (SNG) and/or door counters can be added at any time.

IMMOTION™ Video Overview

Occupancy Display

Occupancy - Live Inside

Occupancy - People Inside

Our wireless people counting solutions records the number of people entering and exiting a building or location in real time. From this information we can calculate and display the total number of people in a venue at any one time. This feature is ideal for venues that are required to monitor capacity numbers in real time to comply with liquor licensing laws, venue capacity limits, etc.

The live count is displayed on a custom styled web page that is compatible with any web-enabled PC, TV, laptop, tablet or smartphone.

The live count total continuously updates depending on the number of people entering or leaving the location. In addition, a separate 'IN' and 'OUT' count total is collected and can be viewed in an hourly, daily, weekly, monthly and yearly breakdown.

As our people counters only count and do not identify people, the privacy of people passing through our counters is assured.

Please visit our Occupancy People Counters page for more information.

Make Inquiry

Optional Extras:

Wireless Range Extender

Range Extender for Wireless People Counters

wireless range extender

The Range Extender increases the wireless range between a Wireless People Counter and the SNG Hub.

With the Wireless People Counter solution the SNG Hub captures the counting data from one or multiple counters and uploads it to a local or remote server every minute. This requires the SNG Hub to be located anywhere within a range of up to 30 metres (unobstructed) from the Wireless People Counter. Implementing the Range Extender effectively increases the range between the SNG Hub and a single Wireless People Counter by up to a further 30 metre range.

The Range Extender has been designed for ease of installation: when a SNG Hub is found the LEDs display the signal strength of the detected device. We recommend the Range Extender is installed in a high position to improve the wireless signal via line of sight.

Make Inquiry

Cloud Hosting

EvolvePlus provides IMMOTION™ on a hosted turnkey cloud solution, leaving you free to focus on what you do best without the burden of ensuring the IMMOTION™ application is stable, maintained, and secure.

Our cloud solution is run on Amazon's secure and scalable AWS platform based out of Sydney Australia for optimal speed and performance.

Contact for pricing



EvolvePlus Clients

  • Hobart City Council
  • Kimberly Clark
  • UNSW Sydney
  • Parks Victoria
  • City Of Greater Geelong
  • Weber BBQ
  • City of Melton
  • Hobsons Bay City Council
  • Mornington Peninsula Shire
  • Wyndham City
  • Oz Design
  • Randwick City Council
  • TEEG
  • Moreton Bay Regional Council
  • National Archives of Australia
  • City of Darwin
  • Weslo Events
  • City of Busselton
  • Cairns Regional Council
  • Adenbrook Homes
  • City of Playford

Terms & Conditions

Terms & Conditions

If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern EvolvePlus Pty Ltd relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website. The term 'EvolvePlus' or 'us' or 'we' refers to the owner of the website whose registered office is 5a Hartnett Close, Mulgrave, Victoria, 3170. Our company registration number is 150 916 840 and our place of registration is Victoria, Australia. The term 'you' refers to the user, customer or viewer of our website.

Disclaimer

  • All prices are subject to change without notice. With our People Counter products designed and built in Europe our prices can be affected by increases in the Australian dollar exchange rate and other fluctuating business costs which may occasionally result in price changes without notice.
  • EvolvePlus shall not be liable for any errors or for incidental or consequential damages in connection with the furnishing, performance or use of any products purchased.
  • The specifications of all products listed on our website are approximate and subject to change without notice.
  • European designed and built
  • Exceptional after sales support
  • Illustrations depicted on this website are for information purposes only. Product models and physical features are subject to variation without notice.

Ordering

  • Orders can be placed via our online store or by email to This email address is being protected from spambots. You need JavaScript enabled to view it..
  • For reasons of security and accuracy we are not able to accept orders placed by phone. If ordering via a method other than our online store, please ensure your order makes reference to the EvolvePlus product codes or description. In the event that you do not use such product codes/description we cannot guarantee you will receive the correct items.
  • Upon receipt of your order, we will prepare the goods and then supply a tax invoice to you with an itemised price breakdown, GST and any other applicable charges.
  • By placing an order (either in writing, via email or via our online store for supply of goods by EvolvePlus, the customer has acknowledged acceptance of our Terms and Conditions of sale and Privacy Policy set out herein.
  • Title of all goods supplied does not pass to the purchaser until full payment has been received and funds cleared by our bank.
  • Customers without an established credit account with EvolvePlus must pay upfront for all goods in full (see payment options, below) before goods will be supplied.
  • Cheque payments may be subject to delays imposed by bank clearance periods.
  • EvolvePlus reserves the right to refuse to supply any order/s without providing a reason for such refusal.

Freight & Transport

  • All pricing includes transport via Australia Post to Australian metropolitan cities. An additional charge may be applicable for orders under $500 to remote and rural locations.
  • EvolvePlus will not be held responsible for any damage, loss or delay occurring to goods in transit. Accordingly, we recommend that you arrange your own transit insurance.
  • EvolvePlus will not accept any responsibility or charges for transport arranged by customers or arranged by EvolvePlus on behalf of the customer.
  • Standard delivery timeframes are usually 3 to 7 business days from receipt of payment, depending on location and stock availability.

Available Payment Options:

  • Via Credit Card or Electronic Bank Transfer into EvolvePlus account prior to shipping (details are listed below).
  • For EFT payments please email the payment confirmation to us to help expedite the process where available. Please ensure you include your organisation name and invoice number as your reference number on your direct deposit. Payment must be cleared by our bank before orders can be dispatched.
  • For payments via credit card please let us know and we will generate a Tax Invoice with a link to our secure credit card payment facility.
  • Limited credit account facilities are available to approved government customers.
  • Our Bank Details are as follows:
    Bank: NAB (National Australia Bank Limited)
    Account Name: EvolvePlus Pty Ltd
    BSB: 083-214
    Account Number: 115751103
    ABN (Australian Business Number) for EvolvePlus Pty Ltd is 69 150 916 840

Schedule of fees

  • Payment by credit card will incur a 1.75% credit card fee on all orders.
  • A $5 Order Administration Fee applies for orders placed that are below $50 ex GST.

Returns Policy

  • A Return Authorisation number must be obtained before returning goods together with a copy of the original invoice to EvolvePlus either for warranty claims or returns for credit.
  • Customers returning goods under warranty must pay all related freight charges (both inbound and outbound.)
  • Proper packaging must be supplied for all returned goods, as any warranty will be void if goods are damaged during transit; damaged goods will not be accepted for credit or warranty.
  • We reserve the right to charge a $20.00 fee to offset testing costs when goods returned for warranty are found to be fault free.
  • A restocking fee of 20% of the invoiced value is applicable to goods returned for credit within 7 days of the dispatch date. These goods must be in original condition and packaging. We will not accept goods returned for credit that arrive later than 7days from the invoice date.

Replacement or Money Back

  • All warranties or guarantees are provided in accordance with the Australian Consumer Law.
  • Warranties are voided if the product has not been used in accordance with any performance ratings or care instructions, or the product has received mistreatment, negligence or interference.
  • To the extent that the law does not allow us to exclude warranties (other than a warranty as to title) but allows us to limit our liability, our liability for any claim is limited to, in relation to goods, a refund of the purchase price actually paid, the replacement of the damaged product or the supply of equivalent product at our absolute discretion.
  • In no circumstances are we liable for special, indirect or consequential loss including any loss of profit or of contract, even if you advise us of any special circumstances or such loss was reasonably foreseeable.

Website Content

The use of this website is subject to the following terms of use:

  • The content of the pages of this website is for your general information and use only. It is subject to change without notice.
  • This website uses cookies to monitor browsing preferences. EvolvePlus will not use this information for the benefit of third parties.
  • Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found, offered or purchased on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
  • Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
  • This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
  • All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
  • Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
  • From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
  • Your use of this website and any dispute arising out of such use of the website is subject to the laws of the Commonwealth of Australia.

Wireless RF People Counters with Remote Data Viewing


Brochures - People Counters
Video Demonstration
Contact for pricing

Our Wireless RF (Radio Frequency) people counting solution comes with two sensors, a transmitter and receiver, which are positioned across an entrance up to 8 metres wide. Counts are captured as people walk between the sensors and break the infrared beam. Advanced algorithms detect the direction the person is walking and will keep separate counts of people entering and exiting the location.

The sensors have protection against electrical transmission noise and do not respond to rapid hand waves or short-term beam breaks ensuring only extremely accurate count data is recorded.

The count data from the people counters is automatically transmitted wirelessly (via radio frequency) to the SNG Hub (Sensor Network Gateway). For optimum performance, the hub (Ethernet or 4G) must be located within a 20 to 30 metre range of the sensors. A single hub is able to collect count data from up to 10 sensors within a 20 metre radius (repeaters available). The hub automatically sends the count data at regular intervals to the IMMOTION software hosted on-site or in the cloud.

The IMMOTION software allows users to analyse count data by hour, day, week, month, and year in table or graph form. This valuable information reveals peak traffic periods to determine optimal operating hours and staffing requirements, and helps calculate peak visitor times.

The IMMOTION software application is optimised to handle multiple locations for easy viewing and overall analysis. The software is scalable so that additional SNG Hubs and/or sensors can be added at any time.

The People Inside Web App calculates the current ‘live-inside’ occupancy and displays the total number of people in the building. The ‘live-inside’ count total (with a prominent large occupancy number) can be displayed on a range of outputs including large monitors and tablets.

General Features

  • Easy installation
  • Distortion indication
  • ENI: Enhanced Noise Immunity
  • European designed and built
  • Exceptional after sales support
  • 1 Year Warranty
  • No ongoing costs

Package Features

People Counting Sensors

Battery Powered Wireless Sensors

Battery powered people counter

The battery powered people counters provide a completely wireless installation experience. The integrated mounting plates allow for easy self installation using screws, double sided mounting tape or optional metal brackets. The sensors use AA batteries that last up to 2 years with standard usage and can project through glass. The mains powered sensors instantly transmit the count data wirelessly to a nearby hub via radio frequency. The counters can be fitted on standard entrances up to 8 metres wide. They can also be installed on security gates without causing interference and are available with optional outdoor casing.

Mains Powered Wireless Sensors

Mains powered people counter

The mains powered sensors provide a slimline, side mounted installation, ideally suited to door frames where the wiring can be concealed. The secure mounting and robust casing ensures continuous and reliable operation without the need for replacing batteries. The mains powered sensors instantly transmit the count data wirelessly to a nearby hub via radio frequency. They can be fitted on entrances up to 8 meters wide.

SNG Hub (Sensor Network Gateway)

SNG Hub (Sensor Network Gateway)

The SNG Hub wirelessly communicates with the people counting sensors to receive the latest, up to date, count data from one or more entrances within a 30 metre radius. Once received, the count data is automatically sent at regular intervals to the IMMOTION™ software where the count data can be viewed/exported by hour/day/week/month year totals.

The SNG Hub is available in two editions:

Ethernet (SNG10E) Edition

SNG10EThe Ethernet edition (SNG10E) is designed to connect directly into your local network via an Ethernet LAN port or can be connected to your buildings Wi-Fi via an optional Wi-Fi Access Point/Bridge. The SNG10E is ideal for situations where there are Ethernet ports available within a 20 metre range of the people counting sensors. The hub is able to collect count data from up to 10 sensors within a 20 metre radius.

4G (SNG4G) Edition

SNG4GThe 4G Edition (SNG4G) utilises a cellular 4G connection to communicate to the IMMOTION software. The SNG4G is ideal for situations where there are no Ethernet ports available near the sensors. The hub is able to collect count data from up to 10 sensors within a 20 metre radius. The SNG4G requires a full size SIM (not included) and is compatible with all the mobile data providers in Australia and New Zealand.

To use the SNG4G you will also need to be ensure that the server you install IMMOTION™ software onto is externally accessible over the internet.

IMMOTION™ Software

IMMOTION™ Software

Our IMMOTION™ software allows users to analyse count data by hour, day, week, month, and year in table or graph form. This valuable information reveals peak traffic periods to determine optimal operating hours and staffing requirements, and helps calculate customer/sales conversion ratios.

The IMMOTION™ software/database is optimised to handle multiple locations and/or people counters for easy viewing and overall analysis. The IMMOTION™ software/database is scalable so that additional SNG Hub's (SNG) and/or door counters can be added at any time.

IMMOTION™ Video Overview

Occupancy Display

Occupancy - Live Inside

Occupancy - People Inside

Our wireless people counting solutions records the number of people entering and exiting a building or location in real time. From this information we can calculate and display the total number of people in a venue at any one time. This feature is ideal for venues that are required to monitor capacity numbers in real time to comply with liquor licensing laws, venue capacity limits, etc.

The live count is displayed on a custom styled web page that is compatible with any web-enabled PC, TV, laptop, tablet or smartphone.

The live count total continuously updates depending on the number of people entering or leaving the location. In addition, a separate 'IN' and 'OUT' count total is collected and can be viewed in an hourly, daily, weekly, monthly and yearly breakdown.

As our people counters only count and do not identify people, the privacy of people passing through our counters is assured.

Please visit our Occupancy People Counters page for more information.

Make Inquiry

Optional Extras:

Mounting Brackets

Mounting brackets for Wireless People Counters

Wireless people counters include a mounting plate as part of the product design for easy installation on flat surfaces. The following are a list of optional mounting brackets that can be purchased for Wireless People Counters

Metal rotational bracket

Metal Rotational Bracket (x2)

The versatility of the pivoting door sensor holder makes fitting simple in entrances where the mounting location may not be at right angles. These brackets are also provided in a black finish and supplied as a set of two.

Make Inquiry

Polycarbonate Angular Bracket (x2)

metal angular bracket

Suitable for door/frame mounting. Use when fixing the people counters flush against a wall is not possible. This heavy duty bracket also protects your counters from getting knocked out of alignment. These brackets are supplied as a set of two.

Make Inquiry

Wireless Range Extender

Range Extender for Wireless People Counters

wireless range extender

The Range Extender increases the Wireless Range between a Wireless People Counter and the SNG Hub.

With the Wireless People Counter solution the SNG Hub device captures the counting data from one or multiple counters and uploads it to a local or remote server every minute. This requires the SNG Hub to be located anywhere within a range of up to 30 metres (unobstructed) from the Wireless People Counter. Implementing the Range Extender effectively increases the range between the SNG Hub device and a single Wireless People Counter by up to a further 30 metre range.

The Range Extender has been designed for ease of installation: when a SNG device is found the LEDs display the signal strength of the detected device. We recommend the Range Extender is installed in a high position to improve the wireless signal via line of sight.

Make Inquiry

IMMOTION™ Cloud Hosting

EvolvePlus provides IMMOTION™ on a hosted turnkey cloud solution, leaving you free to focus on what you do best without the burden of ensuring the IMMOTION™ application is stable, maintained, and secure.

Our cloud solution is run on Amazon's secure and scalable AWS platform based out of Sydney Australia for optimal speed and performance.

Contact for pricing

Related Articles

Three Easy Steps To Install: Wireless RF People Counter

Comparison of Battery-Powered Wireless People Counters

Battery Powered Outdoor People Counters with Analytics

EvolvePlus Clients

  • Hobart City Council
  • Kimberly Clark
  • UNSW Sydney
  • Parks Victoria
  • City Of Greater Geelong
  • Weber BBQ
  • City of Melton
  • Hobsons Bay City Council
  • Mornington Peninsula Shire
  • Wyndham City
  • Oz Design
  • Randwick City Council
  • TEEG
  • Moreton Bay Regional Council
  • National Archives of Australia
  • City of Darwin
  • Weslo Events
  • City of Busselton
  • Cairns Regional Council
  • Adenbrook Homes
  • City of Playford

USB People Counters with Remote Data Viewing

USB People Counter
Brochures - People Counters
Video Demonstration
Contact for pricing

Our completely wireless USB People Counting System offers a reliable, user-friendly, and affordable tool that will help almost any type of service provider operate more efficiently.  The transmitter unit transmits an infrared beam to the receiver unit.  When someone passes between the 2 units and breaks the infrared beam, the internal counter increases by one.

The people count data is simply collected by connecting any USB Stick to the counter via the supplied adapter cable. The read-out from the counter is a complete memory dump. The advanced viewing software ensures that only the newest data is only ever uploaded therefore reducing the pressure to take 'final reads' to gain accurate daily/weekly/monthly/yearly figures. The data can be viewed and analysed in table or graph form.

Our unique USB People Counters are suitable for remote type sites like toilet blocks, outdoor pathways/tracks, car parks, markets and equally suitable for shops, galleries, libraries when wiring/networks are problematic or costly.

General Features

  • Easy installation
  • Long battery life (AA Batteries)
  • Distortion indication
  • USB adapter cable and flash drive supplied
  • ENI: Enhanced Noise Immunity
  • Remote data viewing
  • Exceptional after sales support
  • 1 Year Warranty
  • No ongoing costs

Optional Extras:

Weatherproof Casing

USB People Counter

A custom designed weatherproof casing is available for purchase with our USB People counters. Molded from the finest commercial grade plastic, the weatherproof and dust-proof case is is designed to withstand the harshest outdoor elements whilst providing superior tamper-proof security to the USB counter sensors. (available in a two piece set).

Make Inquiry

Mounting Brackets

Mounting brackets for USB People Counters

USB people counters include a mounting plate as part of the product design for easy installation on flat surfaces. The following are a list of optional mounting brackets that can be purchased for USB People Counters

Metal rotational bracket

Metal Rotational Bracket (x2)

The versatility of the pivoting door sensor holder makes fitting simple in entrances where the mounting location may not be at right angles. These brackets are also provided in a black finish and supplied as a set of two.

Make Inquiry

Polycarbonate Angular Bracket (x2)

metal angular bracket

Suitable for door/frame mounting. Use when fixing the people counters flush against a wall is not possible. This heavy duty bracket also protects your counters from getting knocked out of alignment. These brackets are supplied as a set of two.

Make Inquiry

Cloud Hosting

EvolvePlus provides IMMOTION™ on a hosted turnkey cloud solution, leaving you free to focus on what you do best without the burden of ensuring the IMMOTION™ application is stable, maintained, and secure.

Our cloud solution is run on Amazon's secure and scalable AWS platform based out of Sydney Australia for optimal speed and performance.

Contact for pricing

Related Articles

Battery Powered Outdoor People Counters with Analytics


EvolvePlus Clients

  • Hobart City Council
  • Kimberly Clark
  • UNSW Sydney
  • Parks Victoria
  • City Of Greater Geelong
  • Weber BBQ
  • City of Melton
  • Hobsons Bay City Council
  • Mornington Peninsula Shire
  • Wyndham City
  • Oz Design
  • Randwick City Council
  • TEEG
  • Moreton Bay Regional Council
  • National Archives of Australia
  • City of Darwin
  • Weslo Events
  • City of Busselton
  • Cairns Regional Council
  • Adenbrook Homes
  • City of Playford

Proximity Sensors

Proximity Sensor
Brochures - People Counters
Contact for pricing

Like to know how long and how often people are standing in front of a specific product in your shop or showroom? We offer a solution to detect the presence of people and measure their proximity relative to a specific object. The measurement indicates the number of people that have moved close to a certain object and how long have they remained in that particular area. This information is sent to a local or remote database and can be viewed in table or graph form. Additionally, the data can be exported as a CSV file to be opened in other applications, such as Microsoft Excel®, for further analysis. Information collected by Proximity Sensors can be used to optimize the store layout by determining which products attract the greatest attention.

Preset detection lengths (request at the time of ordering)

  • 30 cm - will detect people presence anywhere between 1 cm and 30 cm
  • 50 cm - will detect people presence anywhere between 1 cm and 50 cm
  • 70 cm - will detect people presence anywhere between 1 cm and 70 cm

 General Features

  • Easy installation
  • AC power supply
  • Can detect people up to 70 cm away from product
  • European designed and built
  • Exceptional after sales support
  • 1 Year Warranty

The data can be viewed and analyzed in table or graph form. The Proximity Sensor will record how often (blue bar graph) and how long people stand directly in front of the object (orange line graph - total time in seconds).

 

Package Features

Proximity Sensor

Proximity Sensor

Proximity Sensor

Our Proximity Sensor device is designed specifically to detect people’s interest in products, displays, etc. It uses an infrared beam projecting out up to 700 mm. The proximity sensor is discreetly mounted directly beneath an object, sale item, display or interactive information pc and records the popularity of the target item.

The captured people interest count data is automatically relayed wirelessly from Proximity Sensor to the Ethernet Network Gateway device (SNG10E) or 3G Gateway device (SNG103G)

SNG Hub (Sensor Network Gateway)

SNG Hub (Sensor Network Gateway)

The SNG Hub wirelessly communicates with the people counting sensors to receive the latest, up to date, count data from one or more entrances within a 20 metre radius. Once received, the count data is automatically sent at regular intervals to the IMMOTION™ software where the count data can be viewed/exported by hour/day/week/month year totals.

The SNG Hub is available in two editions:

Ethernet (SNG10E) Edition

SNG10EThe Ethernet edition (SNG10E) is designed to connect directly into your local network via an Ethernet LAN port or can be connected to your buildings Wi-Fi via an optional Wi-Fi Access Point/Bridge. The SNG10E is ideal for situations where there are Ethernet ports available within a 20 metre range of the proximity sensors. The hub is able to collect proximity data from up to 10 proximity sensors within a 20 metre radius.

3G (SNG3G) Edition

SNG3GThe 3G Edition (SNG3G) utilises a cellular 3G connection to communicate to the IMMOTION software. The SNG3G is ideal for situations where there are no Ethernet ports available near the sensors. The hub is able to collect count data from up to 10 sensors within a 20 metre radius. The SNG3G requires a full size SIM (not included) and is compatible with all the mobile data providers in Australia and New Zealand.

To use the SNG3G you will also need to be ensure that the server you install IMMOTION™ software onto is externally accessible over the internet.

IMMOTION™ Software

IMMOTION™ Software

IMMOTION™ Software

Our IMMOTION™ software allows users to analyse count data by hour, day, week, month, and year in table or graph form. The Proximity Sensor output will show how often and how long people stand directly in front of the target object.

The IMMOTION™ software/database is optimised to handle multiple sensors for easy viewing and overall analysis. The IMMOTION™ software/database is scalable and the modular design of our solution means that you can "mix and match" the Proximity Sensors with our Infrared Door Sensors and/or Thermal Overhead Sensors with the data reports accessible from a centralised web portal.

IMMOTION™ Video Overview

Optional Extras

Wireless Range Extender

Range Extender for Proximity Sensors

wireless range extender

The Range Extender increases the wireless range between a Proximity Sensor and the Sensor Network that it is connecting to.

With a wireless Proximity Sensor the SNG Hub device captures the counting data from one or multiple Proximity Sensors and uploads it to a local or remote server every minute. This requires the SNG Hub to be located anywhere within a range of up to 20 metres (unobstructed) from the Proximity Sensors. Implementing the Range Extender effectively increases the range between the SNG Hub and a single Proximity Sensor by up to a further 30 metre range.

The Range Extender has been designed for ease of installation: when a SNG Hub is found the LEDs display the signal strength of the detected device. We recommend the Range Extender is installed in a high position to improve the wireless signal via line of sight.

Make Inquiry

IMMOTION™ Cloud Hosting

EvolvePlus provides IMMOTION™ on a hosted turnkey cloud solution, leaving you free to focus on what you do best without the burden of ensuring the IMMOTION™ application is stable, maintained, and secure.

Our cloud solution is run on Amazon's secure and scalable AWS platform based out of Sydney Australia for optimal speed and performance.

Contact for pricing



EvolvePlus Clients

  • Hobart City Council
  • Kimberly Clark
  • UNSW Sydney
  • Parks Victoria
  • City Of Greater Geelong
  • Weber BBQ
  • City of Melton
  • Hobsons Bay City Council
  • Mornington Peninsula Shire
  • Wyndham City
  • Oz Design
  • Randwick City Council
  • TEEG
  • Moreton Bay Regional Council
  • National Archives of Australia
  • City of Darwin
  • Weslo Events
  • City of Busselton
  • Cairns Regional Council
  • Adenbrook Homes
  • City of Playford

Our Products

People Traffic Counters
Counting Customers | Interpreting Information | Driving Decisions - More info...

Library Solutions
BookingsPlus | Netloan | Aurora | RefPlus | Sensify | My Reading List - More info...

Contact Us

EvolvePlus Sales
  Contact: Contact Form
  Phone: Call Us

EvolvePlus Support

  Contact: Contact Form
  Support: Customer Support Portal
  Phone: Call Us

Latest Blog

Trevor
10 April 2024
EvolvePlus offers an easy-to-install, automated wireless people counter solution. It combines wireless RF people counter sensors with the choice of our Australian-developed cloud portal or the IMMOTION on-premi...